Tuesday, December 6, 2011

1HP DEEP WELL JET PUMP

!: Brand new 1HP DEEP WELL JET PUMP Free Shipping

Brand : Sta-Rite | Rate : | Price :
Post Date : Dec 07, 2011 03:40:37 | Usually ships in 1-2 business days


  • "STA-RITE" DEEP WELL JET PUMP
  • Drain cock replaces conventional pipe plug for easy winterizing.
  • Simple, built-in pressure regulator is performance proven.
  • Adjustable for best performance on all deep well installations.
  • Pressure gauge is included.

More Specification..!!

1HP DEEP WELL JET PUMP

Graco Changing Table Save Buy Binocular 7x50 Tartan Handbags Quick

Friday, November 25, 2011

Goulds GT20 Irrigator - 2 hp Irrigation Pump

!: Used Goulds GT20 Irrigator - 2 hp Irrigation Pump buy online

Brand : Goulds
Rate :
Price :
Post Date : Nov 26, 2011 07:13:28
Usually ships in 2-3 business days



FEATURES:Self-Priming Design: Once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe.Serviceable:? Back pullout design allows disassembly of pump for service without disturbing piping.? Two compartment motor for easy access to motor wiring and replaceable components.Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance.Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on.Casing: Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain.Powered for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage.Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry.APPLICATIONS: Specifically designed for the following uses:? Lawn sprinkling? Irrigation? Air conditioning systems? Heat pumps? Water transfer? DewateringGENERAL GT SERIES SPECIFICATIONSPump:? Pipe connections:1½" NPT suction1½" NPT discharge? Capacities: to 110 GPM at 5 foot suction lift? Heads: to 128 feet? Reprime capabilities: to 25 feet suction lift? Maximum working pressure: 125 PSIG? Maximum water temperature: 140° F (60° C)? Rotation: clockwise when viewed from motor end.Motor:? NEMA standard open drip proof? 60 Hz, 3500 RPM? Stainless steel shaft? Single phase: ¾-1½ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset.

Tomcat Mouse Trap Clearance Sale

Wednesday, November 9, 2011

Choosing an Awesome Car Audio System

!: Choosing an Awesome Car Audio System

Being able to drive on a long stretch of empty road is one of the best things that I like about my car. I simply put the top down and allow the wind to rustle through my hair as the miles fly past and the music blare. The bulk of this experience is dependent on nature and the ample availability of time, money and fuel.

However, the last aspect of my driving experience is entirely dependent on the presence of a good car audio system. By meditating or closing my mind to everything else, I can retain my sanity in rush hour traffic. Surviving through rush hour traffic is also a lot easier with the help of great music coming from a good car sound system.

When a good car audio system is matched with the internal and external specifications of the car it is housed in, it will perform at its optimal best. It does not make sense to get a high PMPO, 500 watts car audio system if it can only be housed in the small confine of a Volkswagen beetle. Similarly, getting a tiny, entry level audio system and putting it in the spacious interiors of a hummer or any of the SUVs in the market is not a smart idea.

However, choosing the perfect car audio system is just half of the battle in ensuring that the performance matches the expectations. The myriad of available audio systems for vehicles in the market compounds this problem. You can choose car audio systems that come with basic features. Power house audio systems that come packed with features are also available in the present market. Renowned audio system manufacturers also offer super premium systems that can compete with a home theatre system.

The majority of audio system manufacturer are in the business for audio systems for vehicles. This is only natural considering that the average office worker spends nearly four hours a day traveling in the car. A good car audio system is becoming a necessity, even if music preferences may change from person to person. An audio system is vital in improving the driving experience. This is the reason why you should take the time to choose a good car audio system on the next time that you are in the market for a new car.


Choosing an Awesome Car Audio System

Homedics Back Massager Review Tips Wiki Comment Singing Machine Cdg

Sunday, November 6, 2011

GOULDS PUMPS 40GS30 SUBMERSIBLE PUMP

!: Purchase GOULDS PUMPS 40GS30 SUBMERSIBLE PUMP look for

Brand : GOULDS PUMPS
Rate :
Price :
Post Date : Nov 07, 2011 04:45:08
N/A



SUBMERSIBLE PUMP(LESS MOTOR REQUIRED 3HP)FLOW RANGE GPM:20-65,BEST EFFICIENCY GPM:40,DISCHARGE CONNECTION:2"FEMALE,MINIMUM WELL SIZE:4",ROTATION:CCW, Being sold as new and unused with no warranty or guarantee.

Tips Mesothelioma Help

Saturday, October 22, 2011

Goulds GT07 Centrifugal Pump

!: Shop Goulds GT07 Centrifugal Pump free shipping

Brand : | Rate : | Price :
Post Date : Oct 23, 2011 06:54:22 | Usually ships in 1-2 business days

Bunk Bed With Trundle Bed Help Rockband 2 Cymbals

Tuesday, October 18, 2011

Goulds GS 10 Pump 3/4hp Standard Capacity

!: Good Goulds GS 10 Pump 3/4hp Standard Capacity fast

Brand :
Rate :
Price : $720.00
Post Date : Oct 18, 2011 14:22:14
Usually ships in 1-2 business days



Features n Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor. n Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts. n Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 40 years as a superior sand handling, durable pump design. n FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic. n Discharge Head/Check Valve: Cast 303 stainless steel for strength and durability. Two castin safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation. n Motor Adapter: Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench. n Stainless Steel Casing: Polished stainless steel is strong and corrosion resistant. n Hex Shaft Design: Six sided shafts for positive impeller drive. n Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl® bearing spider for excellent abrasion resistance.

Wolf 36 Dual Fuel Range Quiz !: Usb Turntable Ion Promotional Electric Hedge Clipper

Thursday, April 21, 2011

I have found that gin primes the pump of memory

!1: Now is the time I have found that gin primes the pump of memory Order Today!


Nice Design by :Over All Rating Reviews : Great Deal : Date Created :Apr 22, 2011 06:39:12

!: Oeno Wine Bar Wichita !: Cactus Terrariums Coupon !: Porcelain Markerboard Discount

Sunday, April 3, 2011

A Basement Sump Pump is a Must For a Dry Basement

!: A Basement Sump Pump is a Must For a Dry Basement

If your house has a basement that is located in a damp area or is located near a natural water table then chances are that you basement will secure water from below or even straight through the walls. If you want to keep your house safe from water damage then a basement sump with an sufficient sump pump can pump out any accumulated water and ensure that your basement remains dry at all times.

A basement sump is ordinarily a wide and deep hole that has to be dug at any corner of your basement. The hole is then fitted with a sump pump that is housed in its own casing or drum. This sump basin is then sealed again with concrete and cement, and all you will see is the top lid of the system with pipes that will suck out the water at quarterly intervals. The pumps themselves could be whether submersible or mounted on a pedestal, although the submersible ones are quieter as they are installed inside the sump basin itself. A good move on your part would be to setup a battery backup system with its own sump pump so that you can still pump out water in Case of a power outage or while a flood where power lines might have been knocked out.

Your pump will need an galvanic provide that should be located as high as possible so that it is out of reach of small children and flood water. Facility should be left to basement pump experts that can not only do a professional job but also avow your whole system and stock all spares that might be required in future. Sump pumps are the only true defense against wet basements, and the automated versions will ensure that the pumps turn on when the water reaches a single level. Choosing the right system is foremost as there are any manufacturers and brands vying for your attention in the real and virtual world.

You can find basement pump systems that range from 0 to well over 00. Facility ordinarily takes around a day and the housings too will differ as per the price of such systems. The power of the pump and the efficiency of the backup system will settle if your basement stays dry while an emergency. A pump that can also pump away small debris such as pebbles, twigs, etc should be preferred. Some systems also highlight secondary pumps that can help out the customary pump if it has failed or if the water is flowing in too fast, which could be the Case while a flood. You should choose the right pump based on your needs, the climatic conditions in your city or town, and of course, your budget.

Several brands of such pumping systems are available in the market. Noted among them are Wayne, Basement Watchdog, StormPro, NexPump, Zoeller, Liberty, and Goulds, among any others. You can walk into any home revising or maintenance store or even log on to the Internet to collate features, prices and warranty offered before you make an educated choice. You should also check Facility rates and the promptness with which the installer will attend to your complaint in Case of any problem. Do not let lower prices be the only criteria in development your selection or you could end up with a flooded basement.

A basement sump pump might be a necessity if your basement allows seepage of water. In such a case, the right pumping system could keep your basement dry at all times and substantially increase the life of your house. You should choose an ideal system based on your requirements so as to end up with unblemished peace of mind instead of niggling worries at the corner of your mind.


A Basement Sump Pump is a Must For a Dry Basement

!: Learning To Play Keyboard Free Shipping !: Lawn Hog Clearance Sale !: Cassette Radio Recorders Life Tips

Tuesday, March 22, 2011

Ten prominent Lessons From the History of Mergers & Acquisitions

!: Ten prominent Lessons From the History of Mergers & Acquisitions

The history of mergers and acquisitions in the United States is comprised of a series of five clear waves of activity. Each wave occurred at a dissimilar time, and each exhibited some unique characteristics related to the nature of the activity, the sources of funding for the activity, and to some extent, differing levels of success from wave to wave. When the volume, nature, mechanisms, and outcomes of these transactions are viewed in an objective historical context, important lessons emerge.
 
The First Wave
The first stupendous wave of merger and acquisition performance in the United States occurred between 1898 and 1904. The normal level of about 70 mergers per year leaped to 303 in 1898, and crested at 1,208 in 1899. It remained at more than 300 every year until 1903, when it dropped to 142, and dropped back again into what had been a range of normalcy for the period, with 79 mergers, in 1904. Industries comprising the bulk of performance during this first wave of acquisition and merger performance included traditional metals, fabricated metal products, communication equipment, machinery, petroleum products, bituminous coal, chemicals, and food products. By far, the most motivation for these actions was the expansion of the firm into adjacent markets. In fact, 78% of the mergers and acquisitions occurring during this period resulted in horizontal expansion, and another 9.7% complicated both horizontal and vertical integration.
 
During this era in American history, the firm environment related to mergers and acquisitions was much less regulated and much more dynamic than it is today. There was very exiguous by way of antitrust impediments, with few laws and even less enforcement. 
 
The Second Wave
The second wave of merger and acquisition performance in American businesses occurred between 1916 and 1929. Having become more implicated about the rampant growth of mergers and acquisitions during the first wave, the United States Congress was much more wary about such activities by the time the second wave rolled around. Business monopolies resulting from the first wave produced some store abuses, and a set of firm practices that were viewed as unfair by the American public. Even the Sherman Act proved to be relatively ineffective as a deterrent of monopolistic practices, and so Congress passed another piece of legislation entitled the Clayton Act to reinforce the Sherman Act in 1914. The Clayton Act was somewhat more effective, and proved to be particularly beneficial to the Federal Government in the late 1900s. However, during this second wave of performance in the years spanning 1926 to 1930, a total of 4,600 mergers and acquisitions occurred. The industries with most concentrations of these activities included traditional metals, petroleum products, chemicals, communication equipment, and food products. The upshot of all of these consolidations was that 12,000 clubs disappeared, and more than billion in assets were acquired (17.5% of the country's total manufacturing assets).
 
The nature of the businesses formed was somewhat dissimilar in the second wave; there was a higher incidence of mergers and acquisitions to accomplish vertical integration in the second wave, and a much higher ration of the resulting businesses resulted in conglomerates that included previously unrelated businesses.  The second wave of acquisition and merger performance in the United States ended in the stock store crash on October 29, 1929, and this altered - perhaps forever - the perspective of venture bankers related to funding these transactions. Companies that grew to prominence through the second wave of mergers and acquisitions in the United States, and that still operate in this country today, include normal Motors, Ibm, John Deere (now Deere & Company), and Union Carbide. 

The Third Wave
The American cheaper during the last half of the 1960s (1965 through 1970) was booming, and the growth of corporate mergers and acquisitions, especially related to conglomeration, was unprecedented. It was this economic boom that painted the backdrop for the third wave of mergers and acquisitions in American history. A peculiar feature of this period was the relatively common custom of clubs targeting acquisitions that were larger than themselves. This period is sometimes referred to as the conglomerate merger period, owing in large part to the fact that acquisitions of clubs with over 0 million in assets spiked so dramatically. Compared to the years preceding the third wave, mergers and acquisitions of clubs this size occurred far less frequently. Between 1948 and 1960, for example, they averaged 1.3 per year. Between 1967 and 1969, however, there were 75 of them - averaging 25 per year.  during the third wave, the Ftc reports, 80% of the mergers that occurred were conglomerate transactions. 
 
Although the most recognized conglomerate names from this period were huge corporations such as Litton Industries, Itt and Ltv, many small and medium size clubs attempted to pursue an avenue of diversification. The diversification complicated here included not only goods lines, but also the industries in which these clubs chose to participate. As a result, most of the clubs complicated in these activities moved substantially surface of what had been regarded as their core businesses, very often with deleterious results. 
 
It is important to understand the variation between a diversified company, which is a firm with some subsidiaries in other industries, but a majority of its yield or services within one industry category, and a conglomerate, which conducts its firm in manifold industries, without any real adherence to a particular traditional industry base. Boeing, which primarily produces aircraft and missiles, has diversified by thoughprovoking into areas such as Exostar, an online change for Aerospace & Defense companies. However, Itt has conglomerated, with industry leadership positions in electronic
Components, defense electronics & services, fluid technology, and appeal & flow control. While the bulk of clubs merged or acquired in the long string of performance resulting in the current Boeing firm were practically all aerospace & defense companies, the acquisitions of Itt were far more diverse. In fact, just since becoming an independent firm in 1995, Itt has acquired Goulds Pumps, Kaman Sciences, Stanford Telecom and C&K Components, among other companies.
 
Since the ascension of the third wave of mergers and acquisitions in the 1960s, there has been a great deal of pressure from stockholders for firm growth. With the only comparatively easy path to that growth being the path of conglomeration, a lot of clubs pursued it. That pursuance was funded differently in this third wave of activity, however. It was not financed by the venture bankers that had sponsored the two former events. With the cheaper in expansion, interest rates were comparatively high and the criteria for obtaining prestige also became more demanding. This wave of merger and acquisition activity, then, was executed by the issuance of stock. Financing the activities through the use of stock avoided tax liability in some Cases, and the resulting acquisition pushed up income per share even though the acquiring firm was paying a prime for the stock of the acquired firm, using its own stock as the currency.
The use of this mechanism to boost Eps, however, becomes unsustainable as larger and larger clubs are involved, because the basic assumption in the application of this mechanism is that the P/E ratio of the (larger) acquiring firm will change to the entire base of stock of the newly combined enterprise. Larger acquisitions represent larger percentages of the combined enterprise, and the store is generally less willing to give the new firm the benefit of that doubt. Eventually, when a large number of merger and acquisition activities occur that are founded on this mechanism, the pool of suitable acquisition candidates is depleted, and the performance declines. That decline is largely responsible for the end of the third wave of merger and acquisition activity. 

One other mechanism that was used in a similar way, and with a similar result, in the third wave or merger and acquisition performance was the issue of convertible debentures (debt securities that are convertible into common stock), in order to regain in the income of the acquired firm without being required to reflect an growth in the number of shares of common stock outstanding. The resulting bump in illustrated Eps was known as the bootstrap effect. Over the course of my own career, I have often heard of similar tactics referred to as "creative accounting". 
 
Almost certainly, the most conclusive evidence that the bulk of conglomeration performance achieved through mergers and acquisitions is harmful to uncut firm value is the fact that so many of them are later sold or divested. For example, more than 60% of cross-industry acquisitions that occurred between 1970 and 1982 were sold or divested in some other manner by 1989. The uncut failure of most conglomerations has positively been partly the result of overpaying for acquired companies, but the fact is that overpaying is the unfortunate custom of many companies. In one up-to-date interview I conducted with an very victorious Ceo in the healthcare industry, I asked him what actions he would most strongly propose that others avoid when entering into a merger or acquisition. His response was immediate and emphatic: "Don't become enamored with the acquisition target", he replied. "Otherwise you will overpay. The acquisition has to make sense on several levels, together with price." 
 
The failure of conglomeration, then, springs largely from another root cause. Based on my own palpate and the explore I have conducted, I am reasonably clear that the most basic cause is the nature of conglomeration management. Implicit in the supervision of conglomerates is the idea that supervision can be done well in the absence of specialized industry knowledge, and that just isn't normally the Case. Regardless of the "professional management" firm curricula offered by many institutions of higher studying these days, in most Cases there is just no substitute for industry-specific experience. 
            
The Fourth Wave
The first indications that a fourth wave of merger and acquisition performance was imminent appeared in 1981, with a near doubling of the value of these transactions from the prior year. However, the surge receded a bit, and positively regained serious momentum again in 1984.   according to Mergerstat retell (2001), just over billion was paid in merger and acquisition transactions in 1980 (representing 1,889 transactions), compared to more than billion (representing 2,395 transactions) in 1981. While performance fell back to between billion and billion in the ensuing two years, the 1984 performance represented over 2 billion and 2,543 transactions. In terms of peaks, the number of transactions peaked in 1986 at 3,336 transactions, and the dollar volume peaked in 1988 at more than 6 billion. The entire wave of activity, then, is regarded by analysts to have occurred between 1981 and 1990. 
 
There are a number of aspects of this fourth wave that distinguish it from prior activities. The first of those characteristics is the advent of the hostile takeover. While hostile takeovers have been nearby since the early 1900s, they truly proliferated (more in terms of dollars than in terms of percent of transactions) during this fourth wave of merger and acquisition activity. In 1989, for example, more than three times as many dollars were transacted as a result of contested tender offers than the dollars related with uncontested offers. Some of this phenomenon was intimately tied to another characteristic of the fourth wave of activity; the sheer size and industry prominence of acquisition targets during that period. Referring again to Mergerstat Review's numbers published in 2001, the median purchase price paid in merger and acquisition transactions in 1970, for example, was .8 million. By 1975, it had grown to .9 million, and by 1980 it was .8 million. At its peak in 1988, the median purchase price paid in mergers and acquisitions was 5.1 million.   Exacerbating the situation was the volume of large transactions. The number of transactions valued at more than 0 million increased by more than 23 times between 1974 and 1986, which was a stark variation to the typically small-to-medium size firm based activities of the 1960s.
 
Another factor that impacted this fourth wave of merger and acquisition performance in the United States was the advent of deregulation. Industries such as banking and petroleum were directly affected, as was the airline industry.   Between 1981 and 1989, five of the ten largest acquisitions complicated a firm in the petroleum industry - as an acquirer, an acquisition, or both. These included the 1984 acquisition of Gulf Oil by Chevron (.3 billion), the acquisition in that same year of Getty Oil by Texaco (.1 billion), the acquisition of proper Oil of Ohio by British Petroleum in 1987 (.8 billion), and the acquisition of Marathon Oil by Us Steel in 1981 (.6 billion).  Increased competition in the airline industry resulted in a severe deterioration in the financial performance of some carriers, as the airline industry became deregulated and air fares became exposed to competitive pricing.
 
An further look at the ontology of the ten largest acquisitions between 1981 and 1989 reflects that relatively few of them were acquisitions that extended the acquiring company's firm into other industries than their core business. For example, among the five oil-related acquisitions, only two of them (DuPont's acquisition of Conoco and Us Steel's acquisition of Marathon Oil) were out-of-industry expansions. Even in these Cases, one might argue that they are "adjacent industry" expansions. Other acquisitions among the top ten were Bristol Meyers' .5 billion acquisition of Squibb (same industry - Pharmaceuticals), and Campeau's .5 billion acquisition of Federated market (same industry - Retail). 
 
The final superior aspect of the "top 10" list from our fourth wave of acquisitions is the characteristic that is exemplified by the actions of Kohlberg Kravis. Kohlberg Kravis performed two of these ten acquisitions (both the largest - Rjr Nabisco for .1 billion, and Beatrice for .2 billion). Kohlberg Kravis was representative of what came to be known during the fourth wave as the "corporate raider". Corporate raiders such as Paul Bilzerian, who at last acquired the Singer Corporation in 1988 after participating in numerous former "raids", made fortunes for themselves by attempting corporate takeovers. Oddly, the takeovers did not have to be ultimately victorious for the raider to behalf from it; they merely had to drive up the price of shares they acquired as a part of the takeover attempt. In many cases, the raiders were positively paid off (this was called "greenmail") with corporate assets in change for the stock they had acquired in the attempted takeover. 
 
Another term that came into the lexicon of the firm community during this fourth wave of acquisition and merger performance is the leveraged buy-out, or Lbo. Kohlberg Kravis helped develop and popularize the Lbo idea by creating a series of exiguous partnerships to regain various corporations, which they deemed to be underperforming. In most cases, Kohlberg Kravis financed up to ten percent of the acquisition price with its own capital and borrowed the remainder through bank loans and by issuing high-yield bonds. Usually, the target company's supervision was allowed to sustain an equity interest, in order to provide a financial incentive for them to approve of the takeover.
 
The bank loans and bonds used the tangible and intangible assets of the target firm as collateral. Because the bondholders only received their interest and indispensable payments after the banks were repaid, these bonds were riskier than venture grade bonds in the event of default or bankruptcy. As a result, these instruments became known as "junk bonds." venture banks such as Drexel Burnham Lambert, led by Michael Milken, helped raise money for leveraged buyouts. Following the acquisition, Kohlberg Kravis would help restructure the company, sell off underperforming assets, and implement cost-cutting measures. After achieving these efficiencies, the firm was normally then resold at a indispensable profit.
 
Increasingly, as one reviews the waves of acquisition and merger performance that have occurred in the United States, this much seems clear: While it is inherent to behalf from the creative use of financial instruments and from the clever buying and selling of clubs managed as an venture portfolio, the real and sustainable growth in firm value that is available through acquisitions and mergers comes from improving the newly formed enterprise's uncut operating efficiency. Sustainable growth results from leveraging enterprise-wide assets after the merger or acquisition has occurred. That improvement in asset efficiency and leverage is most frequently achieved when supervision has a basic commitment to the ultimate success of the business, and is not motivated purely by a quick, temporary escalation in stock price. This is related, in my view, to the earlier notice that some industry-specific knowledge improves the likelihood of success as a new firm is acquired. People who are committed to the long-term success of a firm tend to pay more concentration to the details of their business, and to broader scope of technologies and trends within their industry.  
 
There were a few other characteristics of the fourth wave of merger and acquisition performance that should be mentioned before thoughprovoking on. First of all, the fourth wave saw the first indispensable attempt by venture bankers and supervision consultants of various types to provide guidance to acquisition and merger candidates, in order to earn expert fees. In the case of the venture bankers, there was an further opening nearby financing these transactions. This opening gave rise, in large measure, to the junk bond store that raised capital for acquisitions and raids. Secondly, the nature of the acquisition - and especially the nature of takeovers - became more intricate and strategic in nature. Both the takeover mechanisms and paths and the defensive, anti-takeover methods and tools (eg: the "poison pill") became increasingly sophisticated during the fourth wave. 
 
The third characteristic in this kind of "other unique characteristics" in the fourth wave was the increased reliance on the part of acquiring clubs on debt, and perhaps even more importantly, on large amounts of debt, to finance the acquisition. A indispensable rise in supervision team acquisition of their own firms using comparatively large quantities of debt gave rise to a new term - the leveraged buy-out (or Lbo) - in the lexicon of the Wall street analyst. 
 
The fourth characteristic was the advent of the international acquisition. Certainly, the acquisition of proper Oil by British Petroleum for .8 billion in 1987 marked a convert in the American firm landscape, signaling a widening of the merger and acquisition landscape to encompass foreign buyers and foreign acquisition targets. This deal is indispensable not only because it complicated foreign ownership of what had been determined a bedrock American company, but also because of the sheer dollar volume involved. A number of factors were complicated in this event, such as the fall of the Us dollar against foreign currencies (making Us investments more attractive), and the evolution of the global marketplace where goods and services had become increasingly multinational in scope. 
 
The Fifth Wave
The fifth wave of acquisition and merger performance began immediately following the American economic recession of 1991 and 1992. The fifth wave is viewed by some observers as still ongoing, with the clear interruption surrounding the tragic events September 11, 2001, and the salvage period immediately following those events. Others would say that it ended there, and after the combine of years ensuing, we are finding the imminent rise of a sixth wave. Having no strong bias toward whether view, for purposes of our discussion here I will adopt the first position. Based on the value of transactions announced over the course of the respective calendar years, the dollar volume of total mergers and acquisitions in the Us in 1993 was 7.7 billion (an growth from 6.9 billion in 2002), prolonged to grow steadily to 4.6 billion in 1995, and expanded still further to ,073.2 billion by 2000.    
 
This group of deals differed from the former waves in several respects, but arguably the most important variation was that the acquisitions and mergers of the 1990s were more thoughtfully orchestrated than in any former foray. They were more strategic in nature, and good aligned with what appeared to be relatively sophisticated strategic planning on the part of the acquiring company. This characteristic seems to have solidified as a traditional feature of major merger and acquisition activity, at least in the Us, which is encouraging for shareholders finding for sustainable growth rather than a quick - but temporary - bump in share price. 
 
A second characteristic of the fifth wave of acquisitions and mergers is that they were typically more equity-based than debt-based in terms of their funding. In many cases, this worked out well because it relied less on leverage that required near-term repayment, enabling the new firm to be more truthful and deliberate about the sell-off of assets in order to assistance debt created by the acquisition.  
 
Even in cases where both of these features were important aspects of the deal, however, not all have been successful. In fact, some of the biggest acquisitions have been the biggest disappointments over up-to-date years. For example, just before the declaration of the acquisition of Time Warner by Aol, a share of Aol common stock traded for about . In January of 2005, that share of stock was worth about .50. In the Spring of 2003, the median share price was more like .50. The Aol Time Warner merger was financed with Aol stock, and when the thinkable, synergies did not materialize, store capitalization and shareholder value both tanked. What was not foreseen was the devaluation of the Aol shares used to finance the purchase. As analyst Frank Pellegrini reported in Time's on-line edition on April 25, 2002: "Sticking out of Aol Time Warner's rather humdrum income narrative Wednesday was a very gaudy number: A one-time loss of billion. It's the largest spill of red ink, dollar for dollar, in U.S. Corporate history and nearly two-thirds of the company's current stock-market value." 
The fifth wave has also become known as the wave of the "roll-up". A roll-up is a process that consolidates a fragmented industry through a series of acquisitions by comparatively large clubs (typically already within that industry) called consolidators. While the most widely recognized of these roll-ups occurred in the funeral industry, office products retailers, and floral products, there were roll-ups of indispensable magnitude in other industries such as various segments of the aerospace & defense community. 
 
Finally, the fifth wave of acquisitions and mergers was the first one in which a very large ration of the total global performance occurred surface of the United States. In 1990, the volume of transactions in the Us was 1.3 billion, while the Uk had .3 billion, Canada had .3 billion, and Japan represented .2 billion. By the year 2000, the tide was shifting. While the Us still led with ,073 billion, the Uk had escalated to 3.7 billion, Canada had grown to 0.2 billion, and Japan had reached 8.8 billion. By 2005, it was clear that participation in global merger and acquisition performance was now anyone's turf. According to barternews.com: "There was thinkable, growth globally in the M&A arena last year, with record-setting volume of 4.3 billion advent from the Asian-Pacific region, up 46% from 4.5 billion in 2004. In the U.S., M&A volume rose 30% from 6.2 billion in 2004. In Europe the form was 49% higher than the 9.5 billion in 2004. performance in Eastern Europe nearly doubled to a narrative 7.4 billion." 
 
The Lessons of History
Many studies have been conducted that focus on historical mergers and acquisitions, and a great deal has been published on this topic. Most of the focus of these studies has been on more contemporary transactions, probably owing to factors such as the availability of detailed information, and a presumed growth in the relevance of more up-to-date activity. However, before sifting through the group wisdom of the legion of more contemporary studies, I think it's important to look at least briefly to the patterns of history that are reflected earlier in this article.
 
Casting a view backward over this long history of mergers and acquisitions then, observing the relative successes and failures, and the distinctive characteristics of each wave of activity, what lessons can be learned that could enhance the chances of success in time to come M&A activity?  Here are ten of my own observations:

Silver bullets and statistics. The successes and failures that we have reviewed through the course of this episode retell that virtually any type of merger or acquisition is subject to incompetence of execution, and to ultimate failure. There is no blend of store segments, supervision approaches, financial backing, or environmental factors that can warrant success. While there is no "silver bullet" that can warrant success, there are approaches, tools, and circumstances that serve to enhance or diminish the statistical probability of achieving sustainable long-term growth through an acquisition or merger. The Acl Life Cycle is fundamental. The clubs who accomplish sustainable growth using acquisitions and mergers as a mainstay of their firm strategy are those that move deliberately through the Acquisition / Commonization / Leverage (Acl) Life Cycle. We saw evidence of that performance in the case of Us Steel, Allied Chemical, and others over the course of this review. Integration failure often spells disaster. Failure to accomplish enterprise-wide leverage through the commonization of basic firm processes and their supporting systems can leave even the largest and most established clubs vulnerable to defeat in the marketplace over time. We saw a number of examples of this situation, with the American Sugar Refining firm perhaps the most representative of the group. Environmental factors are critical. As we saw in our retell of the first wave, factors such as the emergence of a robust communication ideas and strong, resilient manufacturing processes enabled the success of many commercial mergers and acquisitions. So it was more recently with the advent of data systems and the Internet. Effective strategic planning in general, and productive due diligence specifically, should always include a proper insight of the firm environment and store trends. Often times, acquiring executives become enamored with the acquisition target (as mentioned in our retell of third wave activity), and ignore contextual issues as well as basic firm issues that should be warning signs. Conglomeration is challenging. There were repeated examples of the challenges related with conglomeration in our retell of the history of mergers and acquisitions in the United States. While it is inherent to survive - and even thrive - as a conglomerate, the odds are substantially against it. Those acquisitions and mergers that most often result in achieving sustainable long-term growth are the ones thoughprovoking supervision with indispensable industry-specific and process-specific expertise. Remember the observation, during the course of our retell of fourth wave activity, that "the most conclusive evidence that the bulk of conglomeration performance achieved through mergers and acquisitions is harmful to uncut firm value is the fact that so many of them are later sold or divested." Commonality holds value. Achieving indispensable commonality in basic firm processes and the data systems that sustain them offers an opening for genuine synergy, and erects a substantive barrier against competitive troops in the marketplace. We saw this a number of times; Allied Chemical is especially illustrative.  Objectivity is important. As we saw in our retell of the work on of venture bankers vetoing questionable deals during second wave activities, there is indispensable value in the counsel of objective outsiders. A well-suited counselor will not only bring a clear head and fresh eyes to the table, but will often introduce important evaluative expertise as a result of palpate with other similar transactions, both inside and surface of the industry involved. Clarity is critical. We saw the point of clarity nearby the thinkable, impacts of firm decisions in our retell of the application of the DuPont Model and similar tools that enabled the ascension of normal Motors. Applying similar methods and tools can provide indispensable insights about what financial results may be thinkable, as the result of proposed acquisition or merger transactions. Creative accounting is a mirage. The kind of creative accounting described by another author as "finance gimmickry" in our retell of third wave performance does not originate sustainable value in the enterprise, and in fact, can prove devastating to clubs who use it as a basis for their merger or acquisition activity. Prudence is important when choosing financial instruments to fund M&A transactions. We observed a number of cases where inflated stock values, high-interest debt instruments, and other questionable choices resulted in stupendous devaluation in the resulting enterprise. Perhaps the most illustrative example was the up-to-date Aol Time Warner merger described in the retell of fifth wave activity.

Many of these lessons from history are intimately related, and tend to reinforce one another. Together, they provide an important framework of insight about what types of acquisitions and mergers are most likely to succeed, what methods and tools are likely to be most useful, and what actions are most likely to diminish the company's potential for sustainable growth following the M&A transaction.


Ten prominent Lessons From the History of Mergers & Acquisitions

!: Mouse Deterrents Coupon !: Pancreatic Cancer Life Tips


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。